technical datasheet code 74002NH preliminary version 2 date l 2011 - 04 - 26 2 4 pr cat5e s f /u tp patch 26awg frnc page 1 / 3 ? belden wire & cable b.v. all rights are reserved. rep roduction in whole or in part is prohibited without the written consent of the copyright owner s tandards iso/iec 11801 2nd edition (september 2002) and iso/iec 24702 en 50173 ? 1 (november 2002) . tia/eia - 568 - b.2 (may 2001). c able construction conductor : material stranded pacw construction 7x0.16 mm (2 6 a wg ) i nsulation : material p p solid diameter 0.98 mm +/ - 0.05 pair pair 2 twisted insulated conductors number of pairs 4, all twisted together left hand lay. colour code pair 1 white / blue & blue colour code pair 2 white / orange & orange colour c ode pair 3 white / green & green colour code pair 4 white / brown & brown tape (optional) material polyester tape foil - screen material al/polyester (al side outside ) braided screen: material tinned copper coverage >8 0 % sheath : material frnc uv and oil resistant diameter 6. 5 +/ - 0. 3 mm colour black
technical datasheet code 74002NH preliminary version 2 date l 2011 - 04 - 26 2 4 pr cat5e s f /u tp patch 26awg frnc page 2 / 3 ? belden wire & cable b.v. all rights are reserved. rep roduction in whole or in part is prohibited without the written consent of the copyright owner el ectrical characteristics low fre quency and d.c. d.c. resistance conductor < 1 4 5 /km resistance unbalance < 2 % d.c. insulation resistance > 5000 m .km dielectric strength cond. ? cond. (2 sec.) 2.5 kv d.c. mutual capacitance < 56 nf/km capacitance unbalance < 1600 pf/km high frequency velocity of propagation @ 4 ? 100 mhz 0 .6 c s kew @ 1 ? 100 mhz 40 ns/100m propagation delay @ 1 ? 100 mhz 534 + 36/vf ns/100m mean characteristic impedance (zcm) @ 100 mhz 100 5 input impedance 1 - 100mhz 100 1 5 frequency insertion los s db /100m ( max) next (db) psnext (db) elfext (db) ps elfext (db) return loss (db) 0.772 - 67 64 19.4 1 3 .2 65.3 62.3 63.8 60.8 20 4 6.0 56.3 53.3 51.8 48.8 23 10 9.5 50.3 47.3 43.8 40.8 25 16 12.1 47.2 44.2 39.7 36.7 25 20 13.6 45.8 42.8 37.8 34.8 25 25 15.3 44.3 41.3 35.8 32.8 24.3 31.25 17.1 42.9 39.9 33.9 40.9 23.6 62.5 24.8 38.3 35.4 27.9 24.9 21.5 100 3 2 35.3 32.3 23.8 20.8 20.1 m echanical characteristics elongation at break conductor 10 % elongation at break insulation 100 % elongation at break sheath 100 % tensile strength sheath 9 mpa environmental and ov erall characteristic s maximum operating voltage 450 v d.c. and 3 00 v a.c. maximum continuous current per conduc tor (@25c) 1. 0 a rms halogenfree acc to iec 60754 - 2 oil resistant acc iec 60811 - 2 - 1
technical datasheet code 74002NH preliminary version 2 date l 2011 - 04 - 26 2 4 pr cat5e s f /u tp patch 26awg frnc page 3 / 3 ? belden wire & cable b.v. all rights are reserved. rep roduction in whole or in part is prohibited without the written consent of the copyright owner maximum pulling tension 80 n minimum setting/ bending radius 3 5/70 mm temperature range during installation - 5 / +50 c temperature range during operation - 4 0 / + 8 0 c flame propagation iec 60332 - 1 belden cdt believes this product to be in compliance with the environmental regulations eu rohs (directive 2002/95/ec, 27 january 2003); this is valid for all material produced after the ro hs compliant date for this product.
|
